• 100 watts (4 x “Winged C” EL34’s and 7 x Selected 12AX7’s)• 2 fully independent channels (Channel 1 - Clean/Channel 2 - Crunch) with two independent voicings on Channel 2 (2A for a heavy overdrive tone, 2B for a more saturated, smooth high gain tone)• Both Channels feature Volume, Gain, Bass, Middle, Treble, Presence• Dual Volume/Gain Channel 2 (switchable, allows for two gain settings with 2 volumes for level adjustment to match volumes)• Foot selectable boost switch with tube-driven boost (boosts clean channel and both volume/gain controls on crunch channel). Boost is adjustable from the front panel for approx. 0 - 20db boost.• Rear panel low frequency 3-position adjustment switch (allows for changing the amount and character of the bottom end - effects both channels)• 4 switch foot controller for direct access to all three volume/gain controls (Channel 1, Channel 2A, Channel 2B) connected with a 5-pin XLR cable.• 3 x 1/4" jacks tied to the footswitch controller for controlling through tip to ground control mechanisms as an alternate to the footswitch controller.• 110v, 120v, 220v and 230/240v output selection.• Ohm selector switch for 4, 8 or 16ohm output.• Blue LED's light the box for a distinctive look on stage, along with a classic tolex wrapped front panel with inset grille.• All components specifically spec'd and tested by Diamond before inclusion in the product.• Independent LED's indicate which volume/gain is active and whether the boost is engaged.• Properly designed, tube-driven effects loop (shorting jack so the loop will automatically engage when cables are plugged in and disengage when cables are removed).• Front panel Effects Return control that acts as an overall master when loop is engaged for quick overall volume adjustment.

Controls: Channel 1—Volume, Tone; Channel 2—Volume, Tone, Speed, • Intensity, On/Off, Standby•Channels: 2•Additional Features: Tremolo•Covering (head): Black or Burgundy Snakeskin Tolex•Covering (combo): Black or Burgundy Snakeskin with black/tan basket weave grille•Logo: Etched Zinc logo•Speakers (combo only): Celestion G12H30’s (upgrade to Celestion Blues available) •Cabinet: Baltic Birch top quality cabinet construction (open back on combos) •Tubes: 3 x 12AX7 preamp and 2 x JJ/Tesla EL84 power•Rectifier: 6CA4•Power: 22 Watts•Power rating: Class A•Construction: Hand wired eyelet board•Transformers: Mercury Magnetics

• 100 watts (4 x Svetlana EL34 – 6 x 12AX7)• 2 fully independent channels (Channel 1 - Clean/Channel 2 - Crunch)• Both Channels feature Volume, Gain, Bass, Middle, Treble, Presence• Dual Volume/Gain Channel 2 (switchable, allows for two gain settings with 2 volumes for level adjustment to match volumes)• 2 button footswitch included for access to Ch 1/2 or Ch2 A/B• May be wired for 100v, 120v, 220v and 230/240v output selection.• Ohm selector switch for 4, 8 or 16ohm output.• Red LED's light the box for a distinctive look on stage, along with a unique hexagon pattern front grille and etched zinc logo.• All components specifically spec'd and tested by Diamond before inclusion in the product.• Independent LED's indicate which volume/gain is active.• Properly designed, tube-driven effects loop (shorting jack so the loop will automatically engage when cables are plugged in and disengage when cables are removed).• Front panel Effects Return control that acts as an overall master when loop is engaged for quick overall volume adjustment.

• 100 watts (4 x Svetlana “Winged C” EL34 - 6 x 12AX7)• 2 fully independent channels (Channel 1 - Clean/Channel 2 - Crunch)• Both Channels feature Volume, Gain, Bass, Middle, Treble, Presence• Dual Volume/Gain Channel 2 (switchable, allows for two gain settings with 2 volumes for level adjustment to match volumes)• Rear panel low frequency 3-position adjustment switch (allows for changing the amount and character of the bottom end - effects both channels)• 2 button footswitch included for access to Ch 1/2 or Ch2 A/B• 100v, 120v, 220v and 230/240v output selection.• Ohm selector switch for 4, 8 or 16ohm output.• Green LED's light the box for a distinctive look on stage, along with a unique silver vein front grille and stainless steel logo.• All components specifically spec'd and tested by Diamond before inclusion in the product.• Independent LED's indicate which volume/gain is active and whether the boost is engaged.• Properly designed, tube-driven effects loop (shorting jack so the loop will automatically engage when cables are plugged in and disengage when cables are removed).• Front panel Effects Return control that acts as an overall master when loop is engaged for quick overall volume adjustment.

The Spitfire II (the two channel version) sports the original Spitfire I’s voicing in Channel 1 and a full, rich vintage higher gain Channel 2 with DA’s signature dual volume, gain design. Channel 2’s voicing is big and tight like the best of the vintage heads with an updated feel featuring plenty of lows and mids. •The Spitfires now also feature a “half-power” switch allowing the power rating to be changed from 100 to 50w with the flip of a switch. •The Spitfire line also features DA's signature "low focus" switch on the rear panel. The low focus switch provides 3 positions - low, mid, high. Moving from low to high focuses the low end relative to the mids and highs as well as creates an evenness across all the strings to the high E is not overrung by the low E. •To retain versatility and functionality, all the Spitfire products have a real, correctly-designed effects loop. You do not need a foot switch; you do not have to push a button. Just plug a cable into the effects send and the loop activates. The loop is tube buffered and will not affect your tone. •The front panel features a master volume, which reads E. Return (effects return). When the loop is on, the E. Return knob acts as the amp's overall master (turn this knob up or down to increase or decrease the amps overall volume) and the volume control for each channel acts as the effects send level control. When the loop is off, each channel's volume control acts as that channel's master volume. •Like all current and future Diamond Amplification products, the Spitfire features the highest quality components and construction. Every component was selected and tested for this head. The Spitfire features 12AX7 or ECC83 preamp tubes and 4 Svetlana “Winged C” EL34's for its power stage. Each part was personally spec'd and tested by us to ensure maximum performance and reliability, from the transformers to the switches and knobs. •The head sports a British tan tolex-wrapped front panel windowed for look and ventilation by perforated metal grille. The head shell is available in black or matching British tan. Even the knobs are metal for look and feel. Corner irons are included on every corner to add to the strength and stability of the box.

• All cabinets are hand made• 4 x 12 or 2 x 12 (Celestion V30 speakers)• 8ohms• Baltic Birch construction• Substantially upgraded casters, each with 220lb load rating attached with easy to use quick change plates• Constructed for maximum durability and tone• 4 x 12 Available in four grill choices: Black and Tan Basket Weave, Black Grill Cloth, Black Metal, & Silver Vein Metal• 2 x 12 Available in two grill choices: Black and Tan Basket Weave & Black Grill Cloth

• 4 x 12 or 2 x 12 (Celestion V30 speakers)• 8ohms• Baltic Birch construction• Substantially upgraded casters, each with 220lb load rating attached with easy to use quick change plates• Constructed for maximum durability and tone• 4 x 12 Available in four grill choices: Black and Tan Basket Weave, Black Grill Cloth, Black Metal, & Silver Vein Metal• 2 x 12 Available in two grill choices: Black and Tan Basket Weave & Black Grill Cloth

• 4 x 12 or 2 x 12 (Celestion V30 speakers)• 8ohms• Baltic Birch construction• Substantially upgraded casters, each with 220lb load rating attached with easy to use quick change plates• Constructed for maximum durability and tone• 4 x 12 Available in four grill choices: Black and Tan Basket Weave, Black Grill Cloth, Black Metal, & Silver Vein Metal• 2 x 12 Available in two grill choices: Black and Tan Basket Weave & Black Grill Cloth

• 4 x 12 or 2 x 12 (Celestion V30 speakers)• 8ohms• Baltic Birch construction• Substantially upgraded casters, each with 220lb load rating attached with easy to use quick change plates• Constructed for maximum durability and tone• 4 x 12 Available in four grill choices: Black and Tan Basket Weave, Black Grill Cloth, Black Metal, & Silver Vein Metal• 2 x 12 Available in two grill choices: Black and Tan Basket Weave & Black Grill Cloth

Born from the Del Fuego, our amazingly popular 22watt, Class A, 2 channel fire-breather, the Assassin creates something new -- an 18watt (although the measured output is 26watts) high gain, single channel, gigable and affordable amp suitable for nearly every situation. Covered in black, the Assassin is a quality, hand-built amplifier producing nothing short of ferocious gain and it is lightweight enough to save your back while still having the power to be gigable even in combination with 2 4x12’s. Like the Del Fuego, each Assassin is hand wired on a hand-built fiberglass eyelet board using components selected for reliability and superior sonic character. The Assassin features a full set of tone controls (Volume, Gain, Bass, Middle, Treble and Presence) along with a Gain Mode switch allowing for traditional or diode-clipping gain style. The Assassin uses three 12AX7, two EL84 power tubes, and a solid state rectifier. This amp is hand wired, Class A at it’s finest. You simply won't believe it when you hear it.

Front panel:• Clean and Lead Channel featuring separate Gain controls• Bright switch for the Clean Channel• Bottom switch (Clean & Lead) that adds low end punch• Passive EQ: Bass, Middle, Treble• Lead Volume control for precise level tuning• Mid Boost switch (Clean & Lead), remote controllable via footswitch• Master A and Master B for two different power amp level settings, remote controllable via footswitch• P.T.M. (Power Tube Monitor) system: failure indication via LED for each power tube• Stand By s•Rear Panel:• 2 x 1/4" Stereo jacks for connecting a ENGL Z-4 footpedal: Clean / Lead (channel switching) & Master A / B, Mid Boost & FX Loop off / on• Noise Gate Threshold Controls the Gate’s attack • FX Loop equipped with a Balance control, FX Loop off / on, remote controllable via footswitch • Power amp Output 4 Ohms, 8 Ohms (2 jacks) and 16 Ohms• 100 Watts tube guitar amp head equipped with a matched set of four 6L6GC power tubes• Four ECC83 (12AX7) preamp tubes

Preamp:4 channels. four 3-stage EQs incl. logarithmic treble curve, Bright switch for Channels 1 and 2, separate Gain and Volume controls for each channel, Hi / Lo Gain switch, Noise Gate with threshold adjust, 2 parallel FX loops, 4 x ECC 83 / 12 AX 7 preamp tubes. Tuner out activated via standby switch. •Master Section:100 watts (4 EL 34 tubes), Master A / B switch, Presence and Depth Punch control for poweramp soundshaping, Electronic Tube Protection circuit and powertube monitoring system. •Outputs:MIDI IN / THRU, jack for ENGL Z-9 footswitch, jack for ENGL Z-4 / Z-3 footswitch, 2 x FX Send, 2 x FX Return, 2 x FX Balance, preamp out / tuner, line out / power amp, speaker outs 2 x 4, 2 x 8, 1 x 16 ohms. •MIDI programmable functions at a glance, storable in any combination as required: Channel switching, Master A / B, Bright, Hi / Lo Gain, FX Loop 1 and 2, noise gate, amp mute (tuner) •Dimensions & Weight:71 x 27 x 29 cm, 23 kg

Front panel new features:• 4 Gain control knobs: Clean Gain-1, Crunch Gain-2, Lead Gain-3 and Lead Gain-4• 2 Bottom sound switches, one for Lead-Channel 3 and another one for Lead-Channel 4• Middle-boosted switching (affects all 4 channels) via front panel button or via footswitch •Electronic Power tube monitoring system (P.T.M.) with LED indication (new version) •Front panel common features:• 4 channels: Clean-Channel 1, Crunch-Channel 2, Lead-Channel 3 and Lead-Channel 4• 4 Volume control knobs: Clean Vol.-1, Crunch Vol.-2, Lead Vol.-3 and Lead Vol.-4 • Bright and Bottom sound switches for Clean and Crunch• EQ system Clean and Crunch: Bass, Middle, Treble-Clean, Treble-Crunch• EQ system Lead-Channel 3 and Lead-Channel 4: Bass, Middle or Middle-boosted, Treble• Channel switching via two front panel buttons or via footswitch• Master A and B controls for different output volume settings• Presence and Depth Punch controls in the poweramp stage• Stand By switch•Rear panel new features:• ENGL S.A.C. Port to accept the Custom Footpedal Z-9 (more options) • Noise Gate (including threshold control) can now be activated via footswitch (On/Off)• F.X. Loop Send & Return with Balance control now switchable via footswitch (On/Off) •Rear panel common features:• 3 x 1/4" Stereo jacks for connecting three Z-4 footpedals or a MIDI switching system such as the ENGL Z-11• Poweramp Output 2 x 4 ohms, 2 x 8 ohms and 1 x 16 ohms for many speaker options• 100 Watts output power, 4 x 6L6GC power tubes•Four ECC83 (12AX7) preamp tubes

Preamp:4 channels, Clean, Crunch 1, Crunch 2, Lead, 2 EQs, Sensitivity switch, Bright switch, 2 FX loops (both parallel to serial adjustable), Lead Boost, Contour switch, Rough/Smooth switch plus Hi Balance control, 5 x ECC 83 preamp tubes. •Master Section:Presence A/B, Master A/B, Depth Boost,120 watts (1 x ECC 83, 2 x 6550 power amp tubes) ECS tube protection•Outputs: Balanced Line out,frequency-compensated, adjustable, overload control, speaker outs (2 x 4, 2 x 8, 1 x 16 ohms), 2 FX loops, Z-3/Z-4 footswitch jacks, MIDI interface port, Z-10 footswitch port•Dimensions & Weight:71 x 27 x 27 cm, 20 kg

Preamp:3 channels (3 ECC 83 preamp tubes), Clean, Crunch, Lead, single 3 band EQ, Crunch/Lead, Clean/Lead switches. •Master section:Master volume, 50 watts (1 x EC83, 2 x 5881 power amp tubes. •Outputs:Speaker outs (2 x 8, 2 x 16 Ohms), fx loop (parallel to serial adjustable), dual footswitch jacks (Z-3/Z -4). •Speaker:1 x 12" CelestionÆ Vintage 30 (Combo) •Dimensions & Weight:53 x 45 x 25 cm, 22 kg (Combo)

Preamp:3 channels (3 ECC 83 preamp tubes), Clean, Crunch, Lead, single 3 band EQ, Crunch/Lead, lean/Lead switches. Extra Crunch volume. •Master section:Master volume, 50 watts (1 x EC83, 2 x 5881 power amp tubes. •Outputs:Speaker outs (2 x 8, 2 x 16 Ohms), fx loop (parallel to serial adjustable), dual footswitch jacks (Z-3/Z -4). •Speaker:1 x 12" CelestionÆ Vintage 30 (Combo) •Dimensions & Weight:53 x 45 x 25 cm, 22 kg

Front panel features:• 4 Gain control knobs: Clean Gain-1, Crunch Gain-2, Lead Gain-3 and Lead Gain-4• Middle-voiced switching (affects all 4 channels) via front panel button or via footswitch• Electronic Power tube monitoring system (P.T.M.) with LED indication (new version)• 4 channels: Clean-Channel 1, Crunch-Channel 2, Lead-Channel 3 and Lead-Channel 4• 4 Volume control knobs: Clean Vol.-1, Crunch Vol.-2, Lead Vol.-3 and Lead Vol.-4 • EQ system Clean and Crunch: Bass, Middle, Treble-Clean, Treble-Crunch• EQ system Lead-Channel 3 and Lead-Channel 4: Bass, Middle or Middle-voiced, Treble• Channel switching via two front panel buttons or via footswitch• Master A and B controls for different output volume settings• Presence and Depth Punch controls in the poweramp stage• Stand By switch•Rear panel features:• ENGL S.A.C. Port to accept the Custom Footpedal Z-9 (more options)• Noise Gate (including threshold control) can now be activated via footswitch (On/Off)• F.X. Loop Send & Return with Balance control now switchable via footswitch (On/Off) • 3 x 1/4" Stereo jacks for connecting three Z-4 footpedals or a MIDI switching system such as the ENGL Z-11• Poweramp Output 2 x 4 ohms, 2 x 8 ohms and 1 x 16 ohms for many speaker options• 100 Watts output power, 4 x 6L6GC power tubes•Four ECC83 (12AX7) preamp tubes

Speaker:2 x 12 Celestion V 30, 60 watts•Impedance:8 Ohms•Wood:Siberian Birch 14 times folded•Dimensions & Weight:58 x 47 x 30 cm, 21 kg

Speaker:4 x12 CelestionÆ Vintage 30 240 watts mono, 2 x 120 watts stereo•Impedance:8 Ohms mono, 2 x 16 Ohms stereo•Wood:Siberian Birch ñ 14 times folded•Dimensions & Weight:74 x 75 x 36 cm, 52 kg•

High Gain, Powerful with a tight bottom end•120 Watts RMS of luscious EL-34 Tube power•3 Channels & 3 boosts, powered by 5 12AX7 Tubes•3 band passive interactive tone controls on each channel•Dual Reverbs controls•Clean Channel with massive headroom and dynamic range•Totally adjustable Parallel effects loop with hard wire bypass and footswitchable•Rugged Rivera® construction, with military and audiophile grade components, oversize transformers, Accutronics Reverb pan•Headmaster Midi switcher included

Mick Thomson, guitar god of Slipknot, took the Rivera K412 cabs and asked that his signature K412-MT cabs be loaded with Celestion G12K-100 speakers for teeth-rattling power and supreme headroom. These Rivera speaker enclosures are ruggedly built with Finland birch plywood for years of road use.

Selectable 100/50-watt tube head •Two 12AX7 preamp & four 6L6 power amp tubes (user can substitute EL 34s) •Emulated Line out with 2 different mic positions •Front panel analog meter displays tube saturation of both preamp and power amp •Gain & Level Controls •3 selectable Reverbs •Selectable Active & Passive EQ with Bass, Mid (swept in Lead Channel), Treble •3-position Voicing switch •Level •Presence •SoloBoost with amount, On/Off & Gain/Level Select •Power amp Mute switch •2 effects loops each with Level, Series/Parallel select, & Channel Auto Assign •Power amp Mute switch •50/100 Watt Switch •Chassis mounted Bias Switch (6L6 or EL34) •Output Impedance Selector •Slave Out Level •Mic position for emulated line out •Ground lift for emulated line out •Series/Parallel Switch for each effects loop •+4dBu/-10dBV Switch for each effects loop •Effects Level for each effects loop •Effects Loop Auto Assign (one for each channel) •Reverb Type Switch (one for each channel) •Reverb Types: Plate, Spring, Hall •